Edwards IPVA10EK Mode D'emploi page 2

We, Edwards,
Crawley Business Quarter,
Manor Royal,
Crawley,
West Sussex RH10 9LW, UK
declare under our sole responsibility that the product(s)
IPVA10EK Air Admittance Valves, normally open:
240 V a.c. C417-21-000
110 V a.c. C417-22-000
24 V a.c. C417-23-000
24 V a.c. C417-24-000
12 V d.c. C417-25-000
to which this declaration relates is in conformity with the following standard(s) or other normative document(s)
EN60730-2-8 Automatic electrical controls for household and similar use – Particular requirements for electrically operated water valves,
Including mechanical requirements.
EN50581:2012 Technical Documentation for the Assessment of Electrical and Electronic Products with respect to the Restriction of Hazardous Substances.
following the provisions of
* 2006/95/EC Low Voltage Directive.
†
2011/65/EU Restriction of Certain Hazardous Substances (RoHS) Directive
* Note: 12 V a.c./d.c. and 24 V a.c./d.c. are outside the scope of the Low Voltage Directive.
†
i.e. The product(s) contain less than - 0.1wt% for hexavalent chromium, lead, mercury, PBB and PBDE; 0.01wt% for cadmium - in homogeneous materials (subject to the
exemptions allowed by the Directive). The RoHS Directive does not legally apply to industrial vacuum equipment until July 2019 (July 2017 for instruments).
Mr L Marini, Senior Technical Manager
Declaration of Conformity
IPVA10EK Air Admittance Valves, normally closed:
This product has been manufactured under a quality system registered to ISO9001
240 V a.c. C417-31-000
110 V a.c. C417-32-000
24 V d.c. C417-33-000 *
24 V a.c. C417-34-000 *
12 V d.c. C417-35-000 *
14.03.2013, Eastbourne
Date and Place