Description Of The Appliance; Starting Up And Temperature Regulation - ARTHUR MARTIN ART1000AOW Notice D'utilisation

Changing the freezer
compartment door
Open the freezer compartment door a little
way. Using a small screwdriver, press the
spring in the opening of the lower door
bearing slightly upwards and take the
door bearing out complete with the door.
1. Position the covering cap (M) on the
opposite side.
2. Turn the freezer compartment door
through 180 and fit the lower door
bearing into the lower bearing cavity
of the freezer compartment door.

DESCRIPTION OF THE APPLIANCE

STARTING UP AND TEMPERATURE REGULATION

Insert the plug of the connection lead
into the plug socket with protective
earth contact. When the refrigerator
compartment door is opened, the internal
lighting is switched on.
The temperature selector knob is
located on the RH side of the refrigerator
compartment.
3. Lift the freezer compartment door a
little way upwards, fit it into the upper
door bearing, and at the same time
insert the lower door bearing into the
square hole.
4. Small upward and downward
adjustments of the freezer compartment
door will make fitting easier.
M
Prior to initial start-up
Please clean the appliance interior and
all accessories prior to initial start-up
(see section: Cleaning and Care).
1
Butter/cheese compartments and
egg storage insert
2
Door storage compartment
3
Bottle shelf
4
Vegetable drawers
5
Storage shelves
6
Temperature regulator
7
Freezer compartment
8
Rating plate
Setting "0" means: Off.
Turning clockwise in direction "1"
Refrigerating unit on, the latter then
operating automatically.
Setting" 1" means: Highest temperature,
warmest setting.
Setting "7" (end-stop) means: Lowest
temperature, coldest setting.
7