ZANKER KEI8440XXK Notice D'utilisation page 21

To start the Automatic Heat Up function for a cooking
zone:
1.
Touch . The symbol
play.
2.
Immediately touch
in the display.
3.
Immediately touch
necessary heat setting comes on. After 3 seconds
comes on in the display.
To stop the function, touch
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3
Power function
The Power function makes more power available to the
induction cooking zones. The Power function can be
activated for a limited period of time ( see Technical In-
formation chapter). After that, the induction cooking
zone automatically sets back to highest heat setting. To
activate, touch ,
or .
Power management
The power management divides the power between
two cooking zones in a pair (see the illustration). The
power function increases the power to the maximum
level for one cooking zone in the pair. The power in the
second cooking zone automatically decreases. The
heat setting display for the reduced zone changes be-
tween two levels.
comes on in the dis-
. The symbol comes on
again and again until the
.
4 5 6 7 8
comes on. To deactivate, touch
Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking
zone operates for only this one time.
Set the Timer after the selection of the cooking
zone.
You can set the heat setting before or after you set the
timer.
• To set the cooking zone: touch
again until the indicator of a necessary cooking zone
comes on.
• To activate or change the Timer: touch
of the timer to set the time (
When the indicator of the cooking zone starts to
flash slow, the time counts down.
• To deactivate the Timer: set the cooking zone with
9
and touch
maining time counts back to
the cooking zone goes out.
• To see the remaining time: set the cooking zone
with . The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
When the time comes to an end, the sound operates
00
and flashes. The cooking zone deactivates.
• To stop the sound: touch
Minute Minder
You can use the Timer as a Minute Minder while the
cooking zones do not operate. Touch
to set the time. When the time comes to an end, the
sound operates and
• To stop the sound: touch
Lock
When the cooking zones operate, you can lock the con-
trol panel, but not
of the heat setting.
First set the heat setting.
again and
00 99
- minutes).
to deactivate the Timer. The re-
00
. The indicator of
. Touch
00
flashes
. It prevents an accidental change
or
or
21