Yamaha MusicCast YSP-5600 Guide De Référence Rapide page 9

1 2 3 4
Unrecommended listening environments
This unit creates surround sound by reflecting projected sound beams off the walls and
the ceiling of your listening room. The surround sound effects produced by this unit
may not be sufficient when this unit is installed in the following locations.
• Rooms with walls inadequate for reflecting sound beams
• Rooms with acoustically absorbent walls and ceiling
• Rooms with measurements outside the following range:
W (3 to 7 m) × H (2 to 3.5 m) × D (3 to 7 m)
• Rooms where objects such as furniture are likely to obstruct the path of sound beams
• Rooms with less than 1.8 m from the listening position to this unit
• Rooms where the listening position is close to the walls
• Rooms where the listening position is not in front of this unit
• Rooms with a complex shape, such as a slanted ceiling (ceiling lights do not obstruct
sound beams)
Enjoying surround effects regardless of conditions (My
Surround)
The My Surround function creates rich surround sound effects in rooms with less than
optimal surround sound conditions. See "Channel Out" (page 72 in the Owner's
Manual) for more information.
• This unit's AUTO SETUP (IntelliBeam) can be used to automatically adjust sound beams to achieve the
optimal surround playback environment according to the listening room setup (p. 14).
Installing the stands
Install the stands (supplied) on the bottom of the unit. Align and insert the protrusion on
the stands into the holes on the rear panel of the unit as shown in the illustration, and
then tighten the screws (supplied) to lock the stands in place. The stands need not be
installed when the unit is mounted on a wall using the optional Wall Mount Bracket
SPM-K30.
Stand (supplied)
Screws (supplied) Stand (supplied)
a Installation
En
9