Yamaha MusicCast YSP-5600 Guide De Référence Rapide page 11

1 2 3 4
Connecting a subwoofer
A subwoofer can be connected to the unit for use with the unit. There are two ways to
connect a subwoofer to the unit: use a third-party RCA monaural cable, or use the
optional wireless subwoofer kit SWK-W16 to connect via a wireless connection.
• See page 25 in the Owner's Manual for more information.
Connecting a subwoofer via cable
Use a third-party RCA monaural cable to connect the subwoofer to the unit via the
monaural input jack on the subwoofer and the SUBWOOFER OUT jack on the unit.
If a Yamaha subwoofer is connected via the SYSTEM CONNECTOR jack, it turns on
and off when the unit is turned on and off.
The unit (rear)
IN 1
(HDCP2.2)
IN 2
IN 3
SYSTEM SUBWOOFER
IN 4
HDMI CONNECTOR OUT
OUT
(ARC)
NETWORK
UPDATE ONLY
SYSTEM SUBWOOFER R L AUX2 TV OPTICAL IR-IN IR-OUT RS-232C
CONNCETOR OUT AUX1
• When the unit is connected to the subwoofer via the cable, set the subwoofer output to "Wired" in the setup
menu (page 73 in the Owner's Manual).
Using the optional wireless subwoofer kit SWK-W16
The optional wireless subwoofer kit SWK-W16 enables wireless connection of a
subwoofer to the unit. Install the SWK-W16 on or near the subwoofer.
Connecting the power cable
After all the connections are complete, plug in the power cable.
Subwoofer
INPUT SYSTEM
CONNECTOR
SWK-W16
Subwoofer
The unit (rear)
AC IN
IN 4
HDMI
OUT
(ARC)
SYSTEM SUBWOOFER R L AUX2 TV OPTICAL IR-IN
CONNCETOR OUT
AUX1
To an AC wall outlet
b Connections 11
En