Yamaha MusicCast YSP-5600 Guide De Référence Rapide page 10

1 2 3 4
b
Connections
Connecting a TV and BD/DVD player
For the cable connection, follow the procedure below. See pages 23 to 24 in the Owner's Manual when connecting other playback devices such as a game console.
Video signals
Audio signals
Use an optical cable when
connecting a TV that does not
support Audio Return Channel.
1. Remove the cap
2. Check the direction of
the plug
AC IN
10 b Connections
En
HDMI INPUT
OPTICAL
1 2 3
OUTPUT
2 1
OUT IN 1
(ARC) (HDCP2.2)
TV
IN 1
(HDCP2.2)
IN 2
IN 3
IN 4
HDMI
OUT
(ARC)
UPDATE ONLY NETWORK
SYSTEM SUBWOOFER R L AUX2 TV OPTICAL IR-IN IR-OUT RS-232C
CONNCETOR OUT AUX1
TV 1
HDMI cable (optional)
The digital audio/video signals from the BD/DVD player
are input to this unit.
• This unit supports HDCP version 2.2, a copy protection technology. When
using an HDCP 2.2-compliant playback device, such as a set-top box,
connect it to the unit via the HDMI IN 1 jack.
2
HDMI cable (optional)
Digital video from the BD/DVD player is displayed on the
HDMI
OUTPUT
TV.
• Connect the unit to the HDMI IN jack (one compatible with HDCP 2.2) on
an HDCP 2.2-compliant TV to enjoy playback of 4K video.
BD/DVD player
Audio Return Channel (ARC) supported TV
• Connect an HDMI cable to the audio return channel supported jack (the jack with
"ARC" indicated) on TV.
• Enable the HDMI control function of this unit to activate the Audio Return
Channel (ARC). See page 76 in the Owner's Manual.
What is Audio Return Channel (ARC)?
• In order for the unit to play audio from a TV, the TV must usually be connected to
the unit via an audio cable as well as an HDMI cable. If, however, the TV
supports Audio Return Channel (ARC), TV audio signals can be input to the unit
via the HDMI cable that outputs video signals from the unit to the TV.
For a wired network connection, connect one end of the network
cable to the NETWORK jack on the rear panel of the unit and the
other end to a router. For details, see page 51 in the Owner's
Manual.