Télécharger Imprimer la page

Ayce SM-05PTC Manuel D'utilisation page 22

Publicité

Les langues disponibles

Les langues disponibles

PRODUCT DESCRIPTION (Fig. 1)
1
Air outlet
2
Main switch
3
Air inlet
OPERATION
Switching the appliance on and off
1.
Insert the mains plug into a wall socket that complies with the technical data.
2.
Turn on the switch 2 by clockwise and the indicator light will light up.
3.
To switch the appliance off completely, set the mains switch 2 to "0".
Thermal cut - out
For your safety the appliance has a thermal cut-out.
If the temperature inside the appliance becomes too high, the appliance switches off
automatically.
1.
Switch the mains switch 2 to "0" to switch off the appliance.
2.
Check whether the air inlet or outlet is obstructed and remove the cause. If you
cannot establish a cause and the fault occurs repeatedly, have the appliance
repaired or else take it out of use.
3.
Wait for the appliance to cool down.
4.
You can then continue to operate it normally.
MAINTENANCE
1.
Always disconnect the appliance and let it completely cool before any
maintenance.
2.
Use a vacuum cleaner to remove dust on grilles.
3.
Clean the outside of the unit with a damp cloth and then dry it with a dry cloth.
Never immerse the unit in water, nor let water drip into the unit.
1
3
2
STORING
1.
Always disconnect the appliance, let it completely cool and clean it before storing.
2.
If you do not use the device for a long period, put back the unit and the instruction
manual to the original carton and store in a dry and ventilated place.
3.
Do not place any heavy items on top of carton during storing as this may damage
the appliance.
Information requirement for the electric local space heaters
Model identifier(s): SM-05PTC
Item
Symbol Value
Heat output
Nominal heat output
Pnom
0.5
Minimum heat output
Pmin
0.5
(indicative)
Maximum continuous
Pmax,c
0.5
heat output
Auxiliary electricity consumption
At nominal heat output
elmax
N/A
At minumun heat output
elmin
N/A
In standby mode
elSB
0
42 | 43
GB
Unit
Item
Unit
Type of heat input,for electric storage
local space heaters only (select one)
Manual heat charge control with
N/A
kW
integrated thermostat
Manual heat charge control with
kW
room and/or outdoor
N/A
temperature feedback
Eelectronic heat charge control
kW
with room and / or outdoor
N/A
temperature feedback
Fan assisted heat output
N/A
Type of heat output / room
kW
temperature control (select one)
Single stage heat output and no
kW
No
room temperature control
Two or more manual stages,no
No
kW
room temperature control
With mechanic thermostat room
Yes
temperature control
With electronic room
No
temperature control
Electronic room temperature
No
control plus day timer

Publicité

loading