Table Des Matières; Contents And Introduction - Husqvarna TR 36 Manuel D'utilisation

Contents
Contents and Introduction...................................... 2
Symbols and Decals .............................................. 3
Safety Instructions ................................................. 4
Part Identification (What is What) .......................... 9
Assembly ............................................................... 13
Operation ............................................................... 15
Maintenance & Lubrication .................................... 16
Trouble Shooting Guide......................................... 17
Technical Data....................................................... 18
Conformity Certificates .......................................... 19
Contact Information ............................................... 20
Introduction
Thank you for purchasing your new machine from
Husqvarna Construction Products. We have
provided important safety messages in this manual
and on the machine. Please read these messages
carefully. A safety message alerts you to potential
hazards that could hurt you or others. Each safety
message is preceded one of two words, WARNING
or CAUTION.
These signal words mean:
WARNING: Indicates a hazardous situation which, if
not avoided COULD result in death or serious injury.
CAUTION: Indicates a hazardous situation, which, if
not avoided, COULD result in minor or moderate
injury. It may also be used to alert against unsafe
practices.
Each message tells you what the hazard is, what can
happen, and what you can do to avoid or reduce

CONTENTS and INTRODUCTION

injury. Other important messages are preceded
by the word NOTICE.
NOTICE: Indicates a hazardous situation which,
if not avoided, could result in property damage.
Your machine or other property can be damaged
if you don't follow this instruction.
The safety labels on the trowel should be
periodically inspected and cleaned by the user to
maintain good legibility at a safe viewing
distance. If the label is worn, damaged, or is
illegible, it should be replaced.
Model Identification: Record machine serial
number plate information below for future
reference
A. Model:_____________________________
B. Machine Serial No. ___________________
C. Year of Manufacture __________________
D. Mass of Machine ____________________
E. Engine Power _______________________
F. Trowel Diameter _____________________
Other information not shown on machine serial
plate:
Engine serial No: __________________________
See Engine Operation Manual for location.
Purchase date: ___________________________
2