Bosch PKS 18 LI Notice Originale page 16

OBJ_BUCH-1889-003.book Page 16 Friday, June 17, 2016 10:34 AM
16 | English
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece. With suitable saw
blades, thin-walled non-ferrous metals, e. g., profiles, can al-
so be sawed.
Working ferrous metals is not permitted.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Lock-off button for On/Off switch
2 On/Off switch
3 Battery pack*
4 Vacuum connection
5 Blade guard
6 Lever for retracting blade guard
7 Base plate
8 Saw blade*
9 Retracting blade guard
10 Parallel guide
11 Wing bolt for parallel guide
12 "CutControl" – Viewing window for cutting line
13 Wing bolt for bevel-angle preselection
14 Scale for mitre angle
15 Auxiliary handle (insulated gripping surface)
16 Handle (insulated gripping surface)
17 Battery unlocking button
18 Vacuum hose*
19 Spindle lock button
20 Saw spindle
21 Mounting flange
22 Clamping flange
23 Clamping bolt with washer
24 Hex key
25 Wing bolt for cutting depth preselection
26 Cutting-depth scale
27 Cutting mark, 0°
28 Cutting mark, 45°
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
1 609 92A 21T | (17.6.16)
Technical Data
Circular Saw
Article number
Rated voltage
No-load speed
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Tooth thickness/setting, max.
Tooth thickness/setting, min.
Mounting bore
Weight according to EPTA-
Procedure 01:2014
Permitted ambient temperature
– during charging
*
– during operation and during
storage
Recommended batteries
Recommended chargers
for PBA 18V...V–./
PBA 18V...W–.
for PBA 18V...V–.
* Limited performance at temperatures <0 °C
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-5.
Typically the A-weighted sound pressure level of the product
is 74 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-5:
2
Cutting wood: a < 2.5 m/s , K= 1.5 m/s
h
2
Cutting metal: a = 3.5 m/s , K=1.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signif-
icantly reduce the exposure level over the total working period.
PKS 18 LI
3 603 CB1 3..
V= 18
-1
min 3800
mm 48
mm 36
mm 133 x 244
mm 150
mm 147
mm 1.7
mm 2.2
mm 1.6
mm 16
kg 2.2
°C 0...+45
°C –20...+50
PBA 18V...V–.
PBA 18V...W–.
AL 18.. CV
AL 22.. CV
2
,
2
.
Bosch Power Tools