Partial Repeat Playback (Repeat Playback Of A Specifi Ed Part); Displaying The Audio Information; Switching Subtitles - Onkyo BD-SP309 Mode D'emploi

Partial Repeat Playback (Repeat
Playback of a Specifi ed Part)
1
Press REPEAT during playback.
2
Press / to select "Scene Selection",
then press ENTER.
• "Set Start Point" displays.
Playback Title
Playback Chapter
Scene Selection
Press ENTER at the scene where you want
3
to set the start point.
• "Set End Point" displays.
Press ENTER at the scene where you want
4
to set the end point.
• You can press
scene where you want to set the end point.
When you reach the desired scene, simply
press and then ENTER to set the end
point. To cancel Repeat Playback, press
REPEAT.
NOTE
• Press / , the Repeat Playback is cancelled
and the next chapter being play back.
• Press / once, the Repeat Playback is
cancelled and the player returns to the start of
current chapter (track).
• If you press / again (within about
5 seconds) the player will skip to the beginning of
the previous chapter (track).
• For Partial Repeat Playback, set the start and
end points within the same title.
• Repeat Playback may be forbidden depending
on the disc.
• Partial Repeat Playback may not work in multi-
angle scenes.
• If you press DISPLAY, you can con¿ rm the
Repeat Playback status.
Set Start Point
to fast forward to the

Displaying the Audio Information

You can display the audio information on the disc
currently being played back by pressing AUDIO.
The displayed contents vary depending on the
disc.
The audio channel currently being played back will
be displayed.
If multiple audio channels are recorded, you can
switch the audio channel by pressing AUDIO.
When a recorded broadcast with stereo or
monaural audio is played back:
"Stereo" is displayed. (Audio cannot be switched.)
NOTE
• When you play a programme recorded in stereo
or monaural, and if you are listening to the
Bitstream sound via the digital output jack, you
cannot select the audio channel. Set "Audio Out"
to "PCM" (Page 42).
• Settings for audio can also be changed in the
Function Control screen (Page 39).
• The operation of audio differs according to each
disc. You may need to refer to the operation
manual of the disc.
• The display for audio information automatically
disappears after 5 seconds.

Switching Subtitles

If subtitles are provided in multiple languages, you
can switch between them.
Press SUBTITLE during playback.
• The display indicates the subtitle number
currently being played back, and the subtitles
appear. Each time SUBTITLE is pressed, the
subtitles change.
• "–" is displayed if a disc has no subtitles.
• You can also select "Off".
NOTE
• Settings for subtitles can also be changed in the
Function Control screen (Page 39).
• The operation of subtitles differs according to
each disc. You may need to refer to the operation
manual of the disc.
• The display for subtitle information automatically
disappears after 5 seconds. En
37