Honeywell FENZY AERIS Notice D'utilisation page 10

APPROVALS_________________________________________________________________________________________________
Product complies with the European Parliament and Council Regulation 2016/425/EU for Personal Protective Equipment, Marine Directive
(2014/90/EU), Pressure Equipment Directive (2014/68/EU) and subsequent amendments. Production process is subject of conformity to
type based on quality assurance set out in Module D of PPE Regulation (2016/425/EU), Pressure Equipment Directive (2014/68/EU) and
of Marine Directive (2014/90/EU). Marine Directive mark of conformity is symbolized by a wheel mark followed by the identification number
of the notified body involved in the production control phase and by the year in which the mark is affixed.
The EU type-examination as per Module B of PPE Regulation as well as the production process based on quality assurance of the
conformity to type set out in Module D of PPE Regulation are under surveillance of the notified body number 0082:
APAVE SUDEUROPE SAS - CS60193
13322 MARSEILLE Cedex 16 - FRANCE
Configurations of the product listed in the table below have demonstrated the compliance with the requirements for use in potentially
explosive atmospheres by satisfying the E/S charging test at INERIS according to the standard ISO 80079-36 and INERIS method test for
PPE. Certification in accordance with INERIS procedure allows to affix to products the specific logo:
• MONO-CYLINDER APPARATUS
• TWIN CYLINDER APPARATUS
Cylinder protective covers dedicated for use in explosive atmosphere are available on request.
Please contact our technical department for proper selection of the breathing apparatus intended
for use in the explosive atmosphere.
The complete declaration of conformity can be found at: https://doc.honeywellsafety.com/
Description of apparatus
FENZY AERIS Type II with cylinder body
(P/N 1819458) 6.9 l 300 bar
FENZY AERIS Type II with cylinder body
(P/N 1564701) 7 l 300 bar
FENZY AERIS Type II TWIN with
cylinders (P/N 1564701) 7 l 300 bar
EN - 8
Classification
Dust ATEX IIIA, IIIB, IIIC
Gas ATEX IIA, zone 1, 2
Gas group I
Dust ATEX IIIA, IIIB, IIIC
Gas ATEX IIB, zone 1, 2
Gas group I
Dust ATEX IIIA, IIIB, IIIC
Gas ATEX IIB, zone 1, 2
Gas group I