Getting Started - Telefunken H42S5 Mode D'emploi

Getting Started

Environmental Information
This television is designed to consume less energy
to help save the environment. To reduce energy
consumption, you should take the following steps:
You can use the Power Save Mode setting, located
in the Picture menu. If you set the Power Save Mode
as Eco, the TV will switch to energy-saving mode
and the luminance level of TV set will be decreased
to the optimum level. Note that some picture settings
will be unavailable to be changed when the TV is in
Power Save Mode.
If pressed Right button, "Screen will be off in 15
seconds." message will be displayed on the screen.
Select PROCEED and press OK to turn the screen
off immediately. If you don't press any button, the
screen will be off in 15 seconds. Press any button on
the remote or on the TV to turn the screen on again.
If you disable Power Save Mode, picture mode will
be automatically set to Dynamic.
When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce energy consumption.
1) If the TV does not receive any input signal (e.g.
from an aerial or HDMI source) for 5 minutes, the TV
will go into standby. When you next switch-on, the
following message will be displayed: "TV switched to
stand-by mode automatically because there was
no signal for a long time". Press OK to continue.
2) If the TV has been left on and not been operated
for a while, the TV will go into standby. When you next
switch-on, the following message will be displayed.
"TV switched to stand-by mode automatically
because no operation was made for a long time"
Press OK to continue.
Features
Remote controlled colour LCD TV.
Fully integrated digital terrestrial/cable/satellite TV
(DVB-T/C/S-S2).
HDMI inputs are for connecting a device that has
a HDMI socket.
USB input.
OSD menu system.
Scart socket for external devices (such as DVD
Players, PVR, video games, etc.)
Stereo sound system.
Teletext.
Headphone connection.
Automatic programming system.
Manual tuning.
Automatic power down after up to six hours.
Sleep timer.
Child lock.
Automatic sound mute when no transmission.
NTSC playback.
AVL (Automatic Volume Limiting).
PLL (Frequency Search).
PC input.
Windows 7.
Game Mode (Optional).
Ethernet (LAN) for Internet connectivity and service.
DLNA.
Accessories Included
Remote Control
Batteries: 2 x AAA
Instruction Book
Side AV Connection Cable
TV Control Switch & Operation
1. Standby On/Off button
2. TV/AV button
3. Programme Up/Down buttons
4. Volume Up/Down buttons
English - 26 -