Cameo STUDIO PAR DTW Manuel D'utilisation page 11

SYSTEM INFORMATION (System)
Press the MODE button repeatedly until "Menu" is displayed on the top line of the display. Use the UP and DOWN keys to select the menu
item "System" and press ENTER. Use the UP and DOWN controls to select the desired sub-menu item, and press ENTER to display the
corresponding information.
System
Firmware = display software version
Temperature = display LED temperature in
degrees Celsius or Fahrenheit
Operation Hours = Displays total operating time
in hours
Menu structure
Menu ENTER
System UP/DOWN
1U V1.xx
Temperature LED
Temperature
°F/°C
Total
xx:xxh
System
ENTER
Firmware
/
System ENTER
Temp UP/DOWN
/
System
ENTER
OpHours
Press ENTER to display information
= display temperature by pressing ENTER
= select temperature unit to degrees
Celsius or degrees Fahrenheit. Confirm
with ENTER
Press ENTER twice to display information
1U V1xx
Temp Temp
/
LED °F/°C
ENTER ENTER - UP/DOWN
Temp Unit
xxx°C °C
ENTER
OpHours EN- Total
Total TER xxxxh
Unit
/
°F
ENTER
11