Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Programme
5
6
7
8
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the programme duration and the
consumption values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

5. OPTIONS

Activate or deactivate the op-
tions before the start of a pro-
gramme. You cannot activate or
deactivate the options while a
programme operates.
If one or more options are set,
make sure that the related indi-
cators are on before the pro-
gramme starts.
5.1 ExtraHygiene
With this function you have better hy-
giene results. During the rinsing phase,
the temperature stays at 70 °C for at
least 10 minutes.
How to activate the ExtraHygiene
option
1. Press ExtraHygiene. The related in-
dicator comes on. In the display you
can see the update of the pro-
gramme duration.
1)
Duration
(min)
195
50 - 60
70 - 80
14
Energy
(kWh)
0.82
1.0 - 1.1
0.8 - 0.9
0.1
• If the option is not applicable to
the programme, the related indica-
tor flashes quickly 3 times and then
goes off.
5.2 TimeSaver
This option increases the pressure and
the temperature of the water. The wash-
ing and drying phases are shorter. The
total programme duration decreases by
approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
How to activate the TimeSaver option
1. Press TimeSaver. The related indica-
tor comes on. In the display you can
see the update of the programme
duration.
• If the option is not applicable to
the programme, the related indica-
tor flashes quickly 3 times and then
goes off.
ENGLISH
25
Water
(l)
10.2
10 - 11
11 - 12
4

Publicité

Table des Matières
loading

Table des Matières