Cleaning & Maintenance; Technical Specifications - Heaven Fresh HF 100 Mode D'emploi

Masquer les pouces Voir aussi pour HF 100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CLEANING & MAINTENANCE
Cleaning slot at the base
CAUTION
• Do not plug or unplug the converter from an electric socket while hands are
wet. To avoid electric shock, do not insert metallic objects into the purifier.
• Do not soak or submerge the purifier in water. To avoid damage to internal
parts, do not dismantle the purifier.
• Do not breathe too closely in front of the outflow grille.
• Disconnect the purifier from the power source during cleaning. Cotton
swabs and alcohol can be used to clean the dust collector plate and needles
through the slot at the base of the unit.
• Static electricity noise produced during operation caused by humidity in the
air is not a malfunction but may indicate the unit requires cleaning.
• Mild detergent should be used to clean the exterior of the purifier. Please note
that alcohol, benzene or other strong solvents may damage the housing.
• It is recommended the purifier be placed at a minimum height of
approximately 1.8 meters to facilitate maximum dispersion of fresh, purified
air in the room.

TECHNICAL SPECIFICATIONS

Rated Voltage
Power consumption
Ion Output
Active Oxygen Output Approx. 0.015-0.04 ppm
Dimension
Weight
Applicable Area
Heaven Fresh
Operation indicator (green)
Low V - Automobile 12v
DC power indicator (red)
12V DC / 110-120V 50-60 Hz Adapter (North America)
12V DC / 220-240V 50-60 Hz Adapter (Europe & Asia)
3.4W
MAX 500,000/cm³
8.2"(L) x 5.0"(W) x 2.8"(H) inches
20.8(L) x 12.7(W) x 7.1(H) cm
750 g (1.65 lb)
160 ft² (15 m²)
4
Standard power
indicator (green)
HF 100

Publicité

Table des Matières
loading

Table des Matières