For Your Safety; Specified Conditions Of Use - Weller WR 2: WR 3M Traduction De La Notice Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34

For your safety

Thank you for the confidence you have shown in
buying this device.
The device has been manufactured in accordance
with the most rigorous quality standards which ensu-
re that it operates perfectly.
Read these instructions and the
accompanying safety information
carefully before starting up the device
and starting work with the device.
Keep these instructions in a place that is acces-
sible to all users.
Warning! Fire and explosion hazard!
Hot tools represent a fire hazard
Always place the soldering tool in the safety rest while not in use.
Do not direct hot air soldering tools at people or inflammable objects.
Keep explosive and flammable objects well away from the device.
Do not cover the device.
Warning! Danger of injury
The device or parts of the device may fall off during transportation.

Specified Conditions Of Use

Supply unit for WELLER soldering tools.
Use the repair station only for the purpose indica-
ted in the operating instructions of soldering and
desoldering under the conditions specified herein.
Flammable gases and liquids may not
be extracted.
The device may only be used with
correctly fitted and suitable filter
cartridges.
Replace filter cartridges when full.
42
These instructions contain important information
which will help you to start up, operate and service
the device safely and correctly as well as to eliminate
simple faults and malfunctions yourselves.
The device has been manufactured in accordance
with state-of-the-art technology and acknow-
ledged regulations concerning safety.
There is nevertheless the risk of personal injury and
damage to property if you fail to observe the safety
information set out in the accompanying booklet and
the warnings given in these instructions.
Only use the device indoors. Protect against mois-
ture and direct sunlight.
Intended use of the soldering station/ desoldering
station also includes the requirement that you
adhere to these instructions,
observe all other accompanying documents,
comply with national accident prevention
guidelines applicable at the place of use.
The manufacturer will not be liable for unautho-
rised modifications to the device.

Publicité

Table des Matières
loading

Table des Matières