dirna Bergstrom bycool green line COMPACT 1.4 Manuel De L'utilisateur page 10

COMPACT 1.4
EN
How to deactivate remote control:
In order to deactivate remote control, push key
play. Once it stops flashing, push key
or else you will have to repeat the whole operation.
Equipment switching on
In order to switch on Compact, push the On/off key
F4
(Automatic Function). To change function, push the On/off key
functions will be displayed one by one. Release key when desired function is reached. The
first time equipment is switched on, it will be initiated with the pre-established parameters.
Function
F0
To select F0 the display shows the set temperature and allows the user to choose the
comfort temperature which will be displayed from 15ºC to 27ºC (59ºF to 71ºF) and to
vary the unit blower speed (5 speeds indicated with the characters V1 to V5 ).
Comfort temperature can be controlled by briefly pressing the keys
panel or
The blower speeds are controlled by keeping the keys
pressed down
V4 , V5 . The display shows the degrees selected when the unit is running.
Function F1 - Digital thermometer function
By selecting this function, Compact displays temperature inside cabin.
Function F2 - Time programming function
F2
programs the equipment so that it is automatically disconnected during a 1-9 hour period.
In order to program, push the On/off key
time using the keys
+
- Manual operation
remote control.
or from the remote control, with the display showing V1 , V2 , V3 ,
-
+
and confirm by pushing On/off
-
of control panel until
on panel. You will have to do it within 30 seconds
. Equipment always starts on function
F2
until is shown on display, select functioning
10
C
, flashes on dis-
and the various
-
+ . of the control
-
+ of the control panel
.
®