Instruction Manual
EK 50/5-L
4.
Remarks in respect of the
determined use
Before starting any work on electrical appliances it must be safeguarded that there are no live parts in the immediate
assembly area of the user. If this not possible special precaution measures (
must be provided.
Keep your working area clean and tidy. Do not use this tool when you are tired, on drugs, had alcohol or if you are
medicated.
4.1 Operation of the unit
First you have to select the right dies for the intended application (see table 2).
Cycle: see pictures in front.
Attention
Don't operate the tool without dies.
Attention
The crimping process can be interrupted at any moment by releasing the trigger.
4.2 Explanation of the application range
The tool has a large number of various dies available to crimp Klauke connecting material (Table 2).
Attention
Do only crimp those connecting materials mentioned in Table 2.
If different conducting materials have to be crimped, please contact the manufacturer.
Attention
Do not crimp on live cables or conductors. This tool is not considered an insulated tool.
The hand held tool is not supposed to be restrained in a vise. It is not allowed to use the tool in a stationary applica-
tion.
HE.13435_B © 02/2010
) for working near live parts
see EN 50110-1
5
GB