Description Of The Tool Indication; Remarks In Respect Of The Determined Use - Klauke mini+ Mode D'emploi

Instruction Manual Universal tool
EKM 60UNV-L
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight
corners and other diffi cult working areas.
The tool is equipped with a microprocessor which indicates service intervals and low battery charges and performs
internal checks sending out acoustical and optical warning signals in case of a detected fault.
A white LED illuminates the working space after activating the trigger. It automatically switches off 10 sec. after relea-
sing the trigger. This feature can be deactivated.
The compact ergonomically formed design consists of 2 components. The grip area is rubber coated and therefore
2K
slip resistent. The housing design is optimized in respect of the center of gravity which improves the handling and
supports fatique-proof working.
All tool functions can be controlled by one trigger. This results in an easy handling and a better grip compared to a
two button operation.
Li-Ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation the tool
is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter char-
ging cycles compared to NiMH batteries.
The oil used in our tool is particularly environmentally friendly and and has been rewarded
is also suitable for low temperatures and has excellent lubrication characteristics.

3.3 Description of the tool indication

This tool is equipped with a special circuit board incorporating several important features to inform the user about the
current status of the unit. Please see Table 1 for more details.
Prior to operating the unit the charging level of the battery (pic. 1.5) should have been tested2. A low charging level
can be detected by the fl ashing of the LED (pic. 1.3) for 20 s at the end of a crimping cycle.
4.

Remarks in respect of the determined use

Before starting any work on electrical appliances it must be safeguarded that there are no live parts in the immediate
assembly area of the user. If this not possible special precaution measures (
must be provided.
Keep your working area clean and tidy. Do not use this tool when you are tired, on drugs, had alcohol or if you are
medicated.
HE.14039_C © 02/2011
„The Blue Angel". The oil
) for working near live parts
see EN 50110-1
4
GB