Makita DUR187U Manuel D'instruction page 13

When not in use, store the hex wrench as shown in the
figure to keep it from being lost.
1
► 1. Hex wrench
For DUR187L and DUR188L only
► 1. Handle 2. Hex wrench
OPERATION
Correct handling of tool
WARNING:
Always position the tool on your
right-hand side. Correct positioning of the tool allows
for maximum control and will reduce the risk of seri-
ous personal injury caused by kickback.
WARNING:
Be extremely careful to maintain
control of the tool at all times. Do not allow the
tool to be deflected toward you or anyone in the
work vicinity. Failure to keep control of the tool
could result in serious injury to the bystander and the
operator.
WARNING:
To avoid accident, leave more
than 15m (50 ft) distance between operators when
two or more operators work in one area. Also,
arrange a person to observe the distance between
operators. If someone or an animal enter the
working area, immediately stop the operation.
DUR187U and DUR188U
DUR187L and DUR188L
1
2
Attachment of shoulder harness
CAUTION:
attached. Before operation, adjust the shoulder
harness according to the user size to prevent
fatigue.
Connect the hook of the shoulder harness to the hanger
and put the shoulder harness on. Make sure that the
tool is held securely by the shoulder harness.
DUR187U and DUR188U
1
► 1. Hook 2. Hanger
13 ENGLISH
Always use the shoulder harness
2