Electrical Current - Wilo Star-Z NOVA Notice De Montage Et De Mise En Service

Safety
Electrical
current
8
There is a danger of an electric
shock when working with
electrical current. Therefore:
• Switch off the power before
beginning work on the
pump and make sure that it
cannot be switched on
again accidentally.
• Do not kink or pinch the
power cable or allow it to
come into contact with
sources of heat.
• The pump is protected
against drips in accordance
with protection class IP42.
Protect the pump against
water spray. Do not
immerse in water or other
fluids.
WILO SE 05/2021