Mechanical Installation - Wilo Star-Z NOVA Notice De Montage Et De Mise En Service

Installation
Installation site
14
5 Installation
DANGER: Before starting work, make sure
that the pump has been disconnected from the
power supply.

5.1 Mechanical installation

Provide a weatherproof, frost-free, dust-free and
well-ventilated room for the installation. Choose
an installation site that is easily accessible.
CAUTION: Dirt can cause the pump to fail.
Flush the pipe system before installation.
NOTICE: The ball shut-off valve and
non-return valve are pre-installed. Additional
stop valves are not necessary.
1. Prepare the installation site so that the pump
can be installed without being exposed to
mechanical stresses.
2. Choose the right installation position – only
as shown in figure A.
The arrow on the rear of the housing indicates
the direction of flow.
WILO SE 05/2021