Emission Levels; Intended Use; Technical Data; Machine Features - Festool EHL 65 EQ Instructions De Montage Et D'entretien

2.3

Emission levels

The levels determined in accordance with EN
62841 are typically:
Sound pressure level
Sound power level
Uncertainty
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with EN 62841:
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3

Intended use

One-handed planer suitable for machining
– wood, soft plastics and wood-based materi­
als,
– only with the tools offered by Festool.
This power tool is only designed and approved
to be used by trained personnel or experts.
Usage permitted only with planer heads de­
signed for maximum speed of 22000 rpm.
The user is liable for improper or non-in­
tended use.
L = 87 dB(A)
PA
L = 98 dB(A)
WA
K = 3 dB
(vector sum for
h
a < 2,5 m/s
2
h
K = 1.5 m/s
2
4

Technical data

One-handed planer
Power
Speed (no-load) n
0
Planing width
Planing depth
Max. rebate depth
Weight as per EPTA-Procedure
01:2014
5

Machine features

[1-1]
Angle adapter for attaching a suction
hose
[1-2] Extractor connector
[1-3] Marking for setting the planing thick­
ness
[1-4] Planing thickness adjuster
[1-5] Scale indicating planing thickness
[1-6] Button for switching the extractor
connector to the other side
[1-7] Cover for spiral blade
[1-8] On/Off switch
[1-9] Allen key
[1-10] Support foot
[1-11] V groove for chamfering
The specified illustrations appear at the begin­
ning of the Operating Instructions.
6

Commissioning

WARNING
Unauthorised voltage or frequency.
Risk of accidents
► The mains voltage and the frequency of the
power source must correspond to the
specifications on the machine's name
plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
must be used.
English
EHL 65 EQ
720 W
15,600 rpm
65 mm
0–4 mm
23 mm
2.4 kg
13