vivocare Checky Mode D'emploi page 30

Maintenance
It can cause inaccuracy if the measurement is taken in the following circum-
stances.
Avoid immersing it in the water.
Put in a dry place and avoid the sunshine Clean it with a dry cloth in case.
Avoid dusty environment and
Avoid shaking and collision.
unstable temperature surrounding
Use the slightly damp cloth
Avoid washing the cuf f
to remove the dirt
Please make sure the unit functions safely and it is in proper working conditions
before use. Please follow the instructinos for correct replacement of interchange-
able or detachable parts specified by SERVICE
PERSONNEL of MANUFACTURER as "replaceable". Disposal: Degraded sensors
may result in inaccurate measurement while loosened electrodes may cause the
monitor's failure to power on. The expected life of this unit is two years. Please
dispose of ACCESSORIES, detachable parts, and
ME EQUIPMENT according to local guidelines.
Before Use - Pick out the whole unit. Use the soft cloth to remove the dirt and
apply some alcohol to disinfect the cuff.
After Use - Use the soft cloth to wipe the unit and apply some alcohol to disinfect
the cuff before putting the whole unit back into the storage bag. Please always
disinfect the cuff before applying to another patient.
30