Pro-finder Manual
2.7 Controlling the outputs via SMS
Pro-finder is equipped with 2 separately controllable outputs.
Connection of the outputs is described in chapter 1.5.
Switching outputs permanently:
To switch on output A until cancelled, send an SMS with the following text
to the number of the Pro-finder:
A on
Pro-finder responds to this SMS by switching on output A
and sending a status report.
To switch off output A, send an SMS with the following text
to the number of the Pro-finder:
A off
Pro-finder responds to this SMS by switching off output A
and by sending a status report.
Switch outputs pulsed (on for 1 second):
To switch on output A for 1 second, send an SMS with the following text
to the number of the Pro-finder:
A pulse
Pro-finder responds to this SMS by switching on output A
for the duration of one second and by sending a status report.
Switch outputs for a freely specified time:
To switch on output A for any length of time between 1 and 120 minutes,
send an SMS with the following text to the number of the Pro-finder;
XXX must replaced with the desired number of minutes:
A XXX
Pro-finder responds to this SMS by switching on output A
for the specified duration and by sending a status report.
To control output B, replace the letter A
in the SMS with the letter B.
Page 14