Scope Of Delivery; Selecting The Installation Location - Thitronik Pro-finder Instructions De Service Et De Montage

Pro-finder Manual
Please read the following instructions carefully
to avoid faulty operation.

1.1 Scope of delivery

2
1
1 Pro-finder
2 Antenna
3 Cable assembly
4 Fuse holder
5 Blade-type fuse 3 A
6 Mounting screws
7 Connection cable WiPro III / "all in one"

1.2 Selecting the installation location


Choose an installation location that is sufficiently secured against unauthorized access
and yet is accessible for service tasks, such as replacing the card.
The installation location must be inside the vehicle. Never install the device in the
engine compartment. Because Pro-finder has an integrated GPS receiver, the top side
of the device must be pointing up and a "clear view" to the satellite must be ensured.
As they are penetrated by the GPS signal, plastics, glass and wood will not obstruct the
"clear view" to the satellite.
If an external GPS receiver will be installed, because the installation location of the device
does not have GPS reception, note that the cable length between the GSM module and the GPS
receiver must not exceed 2 m and that the GPS receiver needs a "clear view" to the satellites.
However, the GPS receiver can be installed under plastic coverings on the dashboard (e.g. cover
of the instrument cluster).
4 5
3
7
Page1
6