Fracarro SIG9708CI Instructions D'emploi page 30

Programming the output frequency, the format and RF level of the output and the format and level of
audio.
Set output
frequency
OUT FREQ.
OUTPUT
Video Format
VIDEO FORMAT
setting
RF level
adjustment
Enable/disable
VIDEO TEST
the video test
Audio Output
AUDIO TYPE OUT
adjustment
Audio level
adjustment
Verification of the software version of the headend, BER and S/N measurements. BER and S/N are
approximate values.
MEASURES
Ber of the input signal
S/N of the input signal
(confirm the setting by pressing the
by pressing the S key after the modules programmation)
4.8 OUTPUT
SEL. BY FREQ.
SEL. BY CHANNEL
Letter Box
RF LEVEL OFF
OFF
MONO
AUDIO LEVEL 0
4.9 MEASURES
Module software version
SOFTWARE REL.
BER
S/N (dB)
STANDARD
FREQUENCY (MHz)
Increase/decrease of 0.25MHz by T PE arrows or enter
the value directly by the digit keyboard.
COUNTRY
OUTPUT CHANNEL
Letter Box
Pan Scan
Adapted
Combined
Adapted - 16/9
OFF
15
0, 1, ..., 15
OFF
B&W
BLACK
B&W
MONO
STEREO
AUTO
DUAL SOUND
AUTO
0, 1, ..., 10
10
SIG9708 v.1
1,3*10E-4
11
¸
key; save the settings
0
PAL-BG Read-only
48 860
Read-only
EUROPE
E2-E4
S3-S10
E2 E69
E5-E12
S11-S38
E21-E69
1= undetected signal
0= undetected signal