Connecting The Power Supply; Fm Wire Aerial; Handling And Operation; Setting The Time - SilverCrest SRW 2 A1 Mode D'emploi

Connecting the power supply

GB
CAUTION
IE
► Before connecting the device, compare the connection data
(voltage and frequency) on the rating plate with that of your
mains power supply. These data must agree so that no damage
is sustained by the device.
♦ Insert the power plug into a mains wall socket. The time display
(0:00) flashes on the display

FM wire aerial

♦ Completely unwind the wire aerial

Handling and operation

This section provides you with important information on handling and
using the device.

Setting the time

NOTE
► Make the settings quickly. If you do not press a button for 5 sec-
onds, the entry is cancelled. All settings made up to this point
are saved automatically.
♦ Press the TIME button
flashes, showing the indicator for 24-hour mode (
♦ Press the MIN/+ button
24-hour mode (
12
.
for about 2 seconds. The display
8
or HR/− button
12
) and 12-hour mode (
for FM radio reception.
3
to change between
11
).
).
SRW 2 A1