Sony Walkman MZ-N707 Mode D'emploi page 16

2
Charging the rechargeable battery.
To a wall
outlet
AC power
adaptor
1
Connect the AC power adaptor to DC IN 3V.
2
Place the recorder on the battery charging stand.
"Charging" flashes, e appears in the display, and charging starts. When
charging is completed, the battery indication disappears.
Full charging of a completely discharged rechargeable battery takes about 3
hours.
3
Remove the recorder from the battery charging stand.
Note
The "Charging" indication in the display may not flash immediately after you place the recorder on the
battery charging stand in step 2. The indication will, however, begin flashing after about 3 minutes
and charging will begin
3
Make connections and unlock the
control.
1
Connect the headphones/earphones
with the remote control to i.
Connect firmly.
16
-GB
To DC IN 3V
.
to i
2
Slide HOLD to the direction of the arrow
(.) in the illustration to unlock the
controls.
HOLD
Attach the
connector to
the jack
firmly.
Connect firmly.