Setting The Thermostat; Rain Sensor - Dometic FanTastic Vent 7350 Instructions De Montage Et De Service

Using the device (3300, 3350)
9.3 Switching the fan on and off
➤ Open the window on the shady side of the caravan.
➤ Set the required speed on the fan.
➤ Press UP.
➤ Set the fan, if required, to inlet (IN) or outlet (OUT).
➤ If required, turn the on/off switch to ON.
9.4 Switching to inlet/outlet (3350 only)
➤ Turn the reversing switch to OFF (centre position).
➤ Wait until the fan blades have come to a complete standstill.
➤ Set the reversing switch to the required rotating direction.
9.5

Setting the thermostat

You can set the thermostat switch between blue and red (–5.5 °C to 50.5 °C / 22 °F
to 123 °F). The fan motor switches itself on or off according to the interior tempera-
ture and thermostat setting.
When the set temperature is reached, the fan motor switches off and the cover hood
remains open.
When the thermostat calls for cooling, the fan motor switches on automatically.
Requirements:
• Cover hood is open by at least 5 cm (2 inches)
• Reversing switch is set to OUT (outlet) or IN (inlet) (3350)
• On/Off switch is set to ON (3300)
9.6

Rain sensor

If the rain sensor comes into contact with moisture, the cover hood closes and the fan
motor is switched off.
➤ Press UP to open the cover hood again.
✓ The fan starts working again with the previous settings.
✓ The rain sensor is only activated again once it has dried.
22
FanTastic Vent
EN