Performing Initial Setup - Sonoro MEISTERSTÜCK SO-610 Mode D'emploi

6. If you want to connect MEISTERSTÜCK to your network using an Ethernet
cable, connect an Ethernet cable from LAN port on the back of
MEISTERSTÜCK to your router.
7. Plug-in the AC power cord.
3.4

Performing initial setup

When MEISTERSTÜCK is powered on for the first time,
used in the display) selection appears on the display. Then, the "Setup wizard"
appears on the display. Follow the instructions below to configure some basic
settings.
1. When the "Setup Wizard" is displayed, press
(or rotate the navigation knob) to select "YES" and then press OK to start the
setup.
2. You are then prompted to select:
Time format (12 or 24-hour),
•
Source of auto update (Update from Radio, Internet or no update).
•
Depending on the selection you have made, follow the instructions on the
•
display to further set up date and time, time zone, daylight saving or
© sonoro audio GmbH 2019
the "Language' (to be
+
or – on the remote control
GB
73