Performing Initial Setup - Sonoro MEISTERSTÜCK SO-610 Mode D'emploi

6. If you want to connect MEISTERSTÜCK to your network using an
Ethernet cable, connect an Ethernet cable from LAN port on the
back of MEISTERSTÜCK to your router.
7. Plug-in the AC power cord.
3.4

Performing initial setup

When MEISTERSTÜCK is powered on for the first ti e, the Setup
iza d appea s on the display. Follow the instructions below to configure
some basic settings.
1. Whe the Setup Wiza d is displa ed, press + or – on the remote control
o otate the a igatio k o
start the setup.
2. You are then prompted to select:
▪
Language (to be used in the display)
▪
Time format (12 or 24-hour),
▪
Source of auto update (Update from Radio, Internet or no update).
Depending on the selection you have made, follow the instructions on
the display to further set up date and time, time zone, daylight saving
© sonoro audio GmbH 2017
to sele t YES a d the p ess OK to
75