Kuppersbusch ITE1260-1 Notice D'utilisation page 24

24
3. Adjust the appliance in the niche.
Make sure that the distance between
the appliance and the cupboard front-
edge is 44 mm.
The lower hinge cover (in the accesso-
ries bag) makes sure that the distance
between the appliance and the kitchen
furniture is correct.
Make sure that the clearance between
the appliance and the cupboard is 4
mm.
Open the door. Put the lower hinge
cover in position.
4mm
44mm
4. Attach the appliance to the niche with 4
screws.
2
1
5. Remove the correct part from the hinge
6. Attach the covers (C, D) to the lugs and
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in op-
posite case.
the hinge holes.
Attach the hinge covers (E) to the
hinge.
C
D
E
I
E