Controle Paneel - Rain Bird WTA 2875 Notice D'emploi

Masquer les pouces Voir aussi pour WTA 2875:
Table des Matières

Publicité

WTA Maquette notice.qxd
25/09/02
15:46
Page 21
N L
RAIN BIRD WTA 2875 KRAANCOMPUTER
Dank u voor het kiezen van Rain Bird . Wij raden u aan de volgende
instructies zorgvuldig door te lezen om volledig gebruik te maken van de
mogelijkheden van uw nieuwe Rain Bird kraancomputer.
Uw Rain Bird WTA-2875 kunt u direct op een standaard buitenkraan
schroeven. ( 3/4" or 21X 27 )

1. CONTROLE PANEEL :

Flêche
E
A
C
B
Uren Draaiknop (buitenste zwarte draaiknop A) geeft de starttijd
van het sproeien aan en stelt de huidige tijd in. (ingebouwde klok). De
draaiknop is gemarkeerd van 1 - 24 in uren.
Beregeningsduur (binnenste witte draaiknop B) wordt gebruikt om
de beregeningsduur in te stellen van 30 seconden tot 2 uur. Hij wordt
ook gebruikt om het sproeien handmatig te starten door de draaiknop in
de "ON" positie te zetten of om het sproeien te stoppen door de
draaiknop in de "OFF" positie te zetten.
Sproei frequentie (kleine witte knop C) wordt gebruikt om de
beregeningsfrequentie te kiezen: Elke 8 uur sproeien/elke 12 uur/een
keer per dag/ een keer in de twee dagen/een keer in de drie dagen of een
keer in de week.
50
GB
Small white button (D) used to manually start watering.
LED (E) indicates proper operation of your timer.
2. BATTERY INSTALLATION AND CLOCK SETTING:
Set the black dial (A) to the
current hour before installing
the batteries. Remove the bat-
tery compartment cover (F)
D
and install 2x1,5 V alkaline
batteries type AA LR6 in the
battery cartridge holder. Make
sure to match the "-/+" mar-
kings on the batteries to the
holder. Reinsert the battery
holder into the timer.
Important : Do not use rechargeable batteries.
As soon as the batteries are installed and
the battery holder is reinserted into the
timer, the LOW BATT./SET LOCK will light
up for approximately 10 seconds.The built-
in clock is set to the current time indicated
by the outer black dial (A). You can now
program your watering.
Note: To prevent corrosion, remove batteries when the timer is not in use for
long time periods. We recommend that you store your timer in a sheltered
location when it is not in use for a long time period (example: winter).
The internal clock reverts to the time on the hour dial (A) if batteries
are removed and then reinstalled.
11
F
LED
A

Publicité

Table des Matières
loading

Table des Matières