Operating From The Control Panel - DeLonghi EX 390 Série Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

•

If the windows are large, use additional window bracket

(B4) to cover your window aperture, extending it to the

required length, then blocking it with the locking wing nut

supplied (fig. 3).

•

Insert and lock the accessory for window bracket (B1) al-

ready assembled to the air exhaust hose, into the slot of the

window bracket (fig. 4).

•

In order to facilitate the fitting of the air exhaust hose (B2)

in the relevant housing located on the rear side of the ap-

pliance, position the hose adapter's tabs (B3) in a vertical

axis as shown in fig. 5 .

•

Fit the air exhaust hose (B2) in the relevant housing located

on the rear side of the appliance (fig . 6).

SLIDING WINDOWS

•

Thanks to the locking wing nut, it's possible to use the win-

dow bracket also for sliding windows. Position the hole of the

bracket so to allow a correct installation of the exhaust hose.