Velleman HAMGSM133 Notice D'emploi page 5

Damage caused by user modifications to the device is not covered by
the warranty.
Only use the device for its intended purpose. Using the device in an
•
unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is
•
not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
Nor Velleman nor its dealers can be held responsible for any damage
•
(extraordinary, incidental or indirect) – of any nature (financial,
physical...) arising from the possession, use or failure of this product.
Prerequisites
4.
Following list of items is not included and must be purchased separately
by the user:
power supply (max. 32Vdc stabilized)
•
valid SIM card
•
housing
•
Optional:
USB interface HAMGSM133/USB
•
For the HAMGSM133/USB, the driver software can be found on:
http://www.futurashop.it/download/Compilato_eng.zip
Overview
5.
Refer to the illustrations on pages 2 and 3 of this manual.
1 power supply
2 USB interface (optional)*
O1 output 1
O2 output 2
LD1 relay 1 active
LD2 relay 2 active
LD3 input 1 active (logical condition reached)
LD4 input 2 active (logical condition reached)
LD5 GSM network connection status
U1 transmit LED
U2 receive LED
Installation
6.
When applicable install the USB interface HAMGSM133/USB [2] (not
•
incl.). The mini USB connector must be on top.
Insert a valid SIM card [3]. Make sure the PIN code of the SIM card is
•
disabled. Use a normal mobile phone for this.
Connect the antenna to the antenna connector [4].
•
31.05.2011
HAMGSM133
3 SIM card (not incl.)
4 antenna connector
* HAMGSM133/USB, not incl.
I1 input 1
I2 input 2
U3 mini USB connector
5 ©Velleman nv