Items Supplied; Proper Use; Technical Data; Before Starting The Equipment - EINHELL TH-VC 1820/1 S Mode D'emploi D'origine

2.2 Items supplied

Please check that the article is complete as spe-
cifi ed in the scope of delivery. If parts are missing,
please contact our service center or the nearest
branch of the DIY store where you made your
purchase at the latest within 5 work days after
purchasing the article and upon presentation of
a valid bill of purchase. Also, refer to the warranty
table in the warranty provisions at the end of the
operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Important!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Handle
•
Suction hose
•
3-piece suction tube
•
Dual purpose nozzle
•
4 castors
•
Foamed plastic filter
•
Adapter
•
Fastening screw for handle (2x)
•
Crevice nozzle
•
Original operating instructions
The equipment comes with a chain (z) on the tank
bottom. The chain helps to prevent static charging
during use.
Anl_TH_VC_1820_1_S_SPK1.indb 17 Anl_TH_VC_1820_1_S_SPK1.indb 17
GB

3. Proper use

The wet and dry vacuum cleaner is designed
for wet and dry vacuuming using the approp-
riate fi lter. The appliance is not suitable for the
vacuuming of combustible, explosive or harmful
substances.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.

4. Technical data

Mains voltage: ........................ 220-240 V ~ 50 Hz
Power input: ........................................... 1.250 W
Container volume: ..........................................20 l
Weight: .......................................................4,9 kg
Protection class: ...........................................II /

5. Before starting the equipment

5.1 Appliance assembly
Fitting the appliance head (Fig. 4)
The appliance head (3) is fastened to the con-
tainer (7) by the locking hook (6). To remove the
appliance head (3), open the locking hook (6) and
remove the appliance head (3). When fi tting the
appliance head (3), make sure that the locking
hook (6) locks into place correctly.
Fitting the castors (Fig. 5)
Fit the castors (13) in accordance with Fig. 5.
Fitting the handle (Fig. 6)
Use a screwdriver to fi t the handle (1).
- 17 -
29.08.13 10:23 29.08.13 10:23