Publicité
Les langues disponibles
Les langues disponibles
satisfactory.
After completion of initial system test, a program for periodic testing of this device should be
established.
Provide a copy of these instructions for the Safety Engineer(s), System Operators(s) and Mainte-
nance personnel.
Although your warning system is operating properly it may not be completely effective. People may
not hear or heed your warning signal. You must recognize this fact and ensure that your
warning signal achieves its intended effect through proper test/training sequences
IV. MAINTENANCE.
Failure to follow all the safety precautions and instructions may result in property damage,
• Read and understand all instructions before performing maintenance on this unit.
• Do not perform maintenance on this unit when the circuit is energized.
• Periodic checks should be made to ensure that effectiveness of this device has not been reduced
because objects have been placed in front of the sounder.
• Any maintenance to this unit MUST be performed by a trained electrician in accordance with
NEC guidelines and local codes.
• Never alter this unit in any manner. Safety may be jeopardized if alterations are made to this
device.
• The nameplates, which contain cautionary or other information of importance to maintenance
personnel, should not be obscured if the exterior of the horn is painted.
Unauthorized servicing of this unit may result in diminished performance and/or property damage,
serious injury, or death to you or others. If a malfunctioning unit is encountered,
Refer to paragraph V. SERVICE for instructions regarding return/repair of the unit.
V. SERVICE.
The factory will provide technical assistance with any problem that cannot be handled locally
with satisfaction. Please call customer service for assistance.
If any unit is returned to the factory for repair, it can be accepted only if we are notified by mail or
phone in advance of its arrival. Such notice should clearly indicate service requested and give all
pertinent information regarding the nature of the problem, and if possible, it's cause.
Communication and shipments should be addressed to:
SAFETY MESSAGE TO OPERATORS
suitable for your specific application(s).
SAFETY MESSAGES TO MAINTENANCE PERSONNEL
serious injury, or death.
do not attempt any field repair or retro fit of parts.
FEDERAL SIGNAL CORPORATION
Industrial Systems
Service Department
2645 Federal Signal Drive
University Park, IL 60484-3167
708-534-4858 (Service)
708-534-3424, extension 5823 (Technical Assistance)
-4-
Publicité
