InnoCigs CUBOID TAP Manuel D'utilisation page 62

INNOCIGS CUBOID TAP – USING THE DEVICE
Upload individual Logos
The device supports the user-defined logo function. Download the new firmware at
www.joyetech.com/mvr-software/ and open the folder. Start the program and connect
the device to the computer via a USB cable. Click on the logo button and upload the
image file. (Use a monochrome image in bmp format with a maximum of 64 x 40 pixels
for your logo.)
When the device is on, press the sensors four times (do not press the Fire button) to
enter the menu and carry out your logo settings. Press the "Up" button to access the
ON/OFF settings.
Press the "Down" button to select ON or OFF. Confirm your selection by pressing the
Fire button.
60