Transport And Storage; Maintenance; Safety Instructions - Burkert 3003 Manuel D'installation Et D'utilisation

EN
INTRODUCTION
This manual has been made to guide you through the installation and use of our ER PLUS electric actuators. Please, read it carefully before using our
products and be sure to keep it.
DESCRIPTION
These electric actuators have been designed to perform the control of a valve with 90° rotation (or 180° in case of 3-position version). We cannot be
held responsible for any other use. You can however consult us for any other application.
ATTENTION OWNERS AND USERS
Thank you for purchasing the device. This equipment will provide safe and productive operation as long as it is used in accordance with the instruc-
tions in this Manual and is properly maintained. Importantly, unless the user is adequately trained and supervised, there is a possibility of death,
serious personal injury, property damage or damage to the equipment.
Owners and users of this equipment bear the responsibility to make certain that this equipment is used properly and safely. READ THIS MANUAL
carefully, learn how to use and service this equipment correctly, and strictly follow all of the instructions contained in this Manual and the require-
ments of local law. Failure to do so could result in death, serious personal injury, property damage or damage to the equipment. This Manual should
be considered a permanent part of your machine and should be kept available for easy reference by any user.
Owners should not permit anyone to touch this equipment unless they are over 18 years of age, are adequately trained and supervised, and have
read and understand this Manual. Owners should also ensure that no unauthorized personnel come in contact with this equipment.
If this equipment, or any of its parts, becomes damaged or needs repair, stop using the equipment and contact an experienced service individual
immediately. If the warning labels or this Manual are misplaced, damaged or illegible, or if you require additional copies, please contact us for these
items.
Please remember that this Manual and the warning labels do not replace the need to be alert, to properly train and supervise users, and to use com-
mon sense when using this equipment.
If you are ever uncertain about a particular task or the proper method of operating this equipment, don't hesitate to contact us.

TRANSPORT AND STORAGE

 The forwarding agents being held as responsible for damages and delays of the delivered goods, the consignees are obliged to express if applica-
ble their reserves, prior to accept the goods. The goods delivered directly ex works are subject to the same conditions.
 The transport to the place of destination is carried out by using rigid packing material.
 The products must be stored in clean, dry, and ventilated places preferably on appropriate palettes or shelves.

MAINTENANCE

 Maintenance is ensured by our factory. If the supplied unit does not work, please check the wiring according to the electric diagram as well as the
power supply of the concerned electric actuator.
 For any question, please contact our after-sales service.
 To clean the outside of the actuator, use a lint and soapy water. DO NOT USE CLEANING PRODUCT WITH SOLVENT OR ALCOHOL

SAFETY INSTRUCTIONS

 The electric power supply must be switched-off before any intervention on the electric actuator (i.e. prior demounting its cover or manipulating
the manual override knob).
 Any intervention must only be carried out by a qualified electrician or other person instructed in accordance with the regulations of electric engi-
neering, safety, and all other applicable directives.
 Strictly observe the wiring and set-up instructions as described in the manual: otherwise, the proper working of the actuator can not be guaran-
teed anymore. Verify that the indications given on the identification label of the actuator fully correspond to the characteristics of the electric
supply.
 Respect all safety rules during fitting, dismantling and porting of this apparatus.
 Lifting and carrying through strapping the hand wheel is not allowed.
 Do not lift the actuator by the handle (3003 10Nm / 3003 20Nm).
 Do not mount the actuator « upside down ». Risks:
 Declutching mechanism failure
 Possible flow of the grease on the electronic board
 Do not mount the actuator less than 30 cm of a electromagnetic disturbances source.
 Do not position the equipment so that it is difficult to operate the disconnecting device.
3003 • Rev. 2109/03 • 00809466
To be read prior to the installation of the product
17