Timex W-227 Mode D'emploi page 172

Time of Day Notes & Tips
v For a brief, 3-second look at the month, date, and day of the week,
press RECV/DATE.
v The watch does not automatically adjust for Daylight Savings Time.
When switching between Standard Time and Daylight Savings Time,
you must manually adjust the hour value.
v The watch automatically moves from February 28 to March 1. To
accommodate a leap year, you must manually set the date value to
February 29. The watch will then automatically move from February 29
to March 1.
v At any time during the setting process, press and hold ON/OFF to
quickly increase the setting value or RECV/DATE to quickly decrease
the setting value.
v At any time during the setting process, you can save your changes and
return to the main time display by pressing SET.
v While setting the watch, if you do not press any buttons on the watch
for a period of 2-3 minutes, the watch will automatically save whatever
changes you made and exit the setting process.
18
C & M
are
Heart Rate Monitor
v To avoid build up of materials that can interfere with the Heart Rate
Sensor's ability to receive a valid pulse, rinse the Heart Rate Sensor
with fresh water.
v Do not clean the Heart Rate Sensor or chest strap with abrasive or
corrosive materials. Abrasive cleaning agents may scratch the plastic
parts and corrode the electronic circuit.
v Do not subject the Heart Rate Sensor to excessive force, shock, dust,
temperature, or humidity. Such treatment may result in malfunction, a
shorter electronic life span, damaged batteries, or distorted parts.
v Do not tamper with the Heart Rate Sensor's internal components.
Doing so will terminate the Sensor's warranty and may cause damage.
v The Heart Rate Sensor contains no user-serviceable parts, except bat-
teries.
aintenanCe
19