Adjustment; To Switch Time Zones - Timex W-246 Mode D'emploi

Setting Group
Press START/SPLIT (+) to increase the hour value or
Hour
HEART RATE (-) to decrease the hour value.
Press START/SPLIT (+) to increase the minute value or
Minute
HEART RATE (-) to decrease the minute value.
Press START/SPLIT (+) or HEART RATE (-) to reset the
Second
seconds to zero.
Press START/SPLIT (+) to move forward through the days of
Day of Week the week or HEART RATE (-) to move backward through the
days of the week.
Press START/SPLIT (+) to move forward through the months
Month
or HEART RATE (-) to move backward through the months.
Press START/SPLIT (+) to increase the date value or
Date
HEART RATE (-) to decrease the date value.
Press START/SPLIT (+) or HEART RATE (-) to toggle between
12- or 24-Hour the 12- and 24-hour formats. In the 12-hour format the AM
Format and PM time indicators will also appear above the seconds on
the time display.
NOTE: To quickly change the value being set, press and hold START/SPLIT
(+) or HEART RATE (-).
12

Adjustment

Setting Group
Press START/SPLIT (+) or HEART RATE (-) to toggle between
the appearance options for the month and the day. The
Appearance of the
options include Month Day (MM.DD) or Day Month (DD.MM).
Month and Day
For example, March 15 can appear as 3.15 (MM.DD) or 15.3
(DD.MM).
Press START/SPLIT or HEART RATE to toggle between turning
the chime on and turning the chime off. When you turn the
Hourly Chime
chime on, you will see the chime icon and the watch will emit
a beep every hour on the hour.
Press START/SPLIT or HEART RATE to toggle between turning
the button beep on and turning the button beep off. When you
Button Beep
turn the button beep on, the watch will emit a beep every
time you press a button other than the INDIGLO

To Switch Time Zones

The watch can track two time zones (T1 and T2). To look at the second
zone in Time of Day Mode, press START/SPLIT. T1 or T2 will flash in the
lower right corner indicating the alternate time zone. You can switch from
T1 to T2 or T2 to T1 by using these steps:
1. Press and hold START/SPLIT until HOLD FOR T1 or HOLD FOR T2
appears.
Adjustment
®
button
13