Dremel 670 Mode D'emploi Et Consignes De Sécurité page 6

Assembly
Disconnect the plug of your
! WARNING
rotary tool from the power
source before making any assembly,
adjustments or changing accessories. Such
preventive safety measures reduce the risk of
starting the tool accidentally.
MINI SAW ATTACHMENT INSTALLATION
It is extremely important to carefully read and
follow the directions below to assemble the Mini
Saw Attachment to your rotary tool and ensure
the tool will function properly.
To properly attach the Mini Saw Attachment to the
rotary tool, THREE items must be removed from
the tool: the housing cap, collet nut and collet.
Step 1. Press the shaft lock button, unscrew
and remove the collet nut.
10
DV-2610917718, Page: MUL (VAA), downloaded at: 2016.01.05_00:20:05, by PT-RT/MKP1_Fulvio.Camarotto
Step 2. Remove the collet.
Step 3. Unscrew the housing cap from the tool.
11