Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CLEANING
To avoid accidents always
WARNING
!
disconnect the tool from
the power supply before cleaning or
performing any maintenance. The Mini Saw
Attachment may be cleaned most effectively
with a damp cotton swab or compressed dry
air.
Always wear safety goggles when cleaning
tools with compressed air.
Ventilation openings and switch levers must
be kept clean and free of foreign matter. Do
not attempt to clean by inserting pointed
objects through openings.
Certain cleaning agents and
CAUTION
!
solvents damage plastic parts.
Some of these are: gasoline, carbon tetrachloride,
chlorinated cleaning solvents, ammonia and
household detergents that contain ammonia.
CARE OF BLADES
Blades become dull even from cutting regular
lumber. If you find yourself forcing the rotary
tool forward to cut instead of just guiding it
through the cut, chances are the blade is dull
or coated with wood pitch.
20
DV-2610917718, Page: MUL (VAA), downloaded at: 2016.01.05_00:20:06, by PT-RT/MKP1_Fulvio.Camarotto
When cleaning gum and wood pitch from
blade, unplug the rotary tool and remove the
blade. Remember, blades are designed to cut,
so handle carefully. Wipe the blade with
kerosene or similar solvent to remove the
gum and pitch.
A dull or damaged blade slows the speed of
cutting and places a heavier load on your
rotary tool, and can cause KICKBACK. Keep
extra blades on hand so you always have
sharp, efficient blades ready to replace a dull
or damaged one.
Use only Dremel Saw Blades with your saw
attachment.
21
Publicité
Table des Matières
