Rules For Safe Operation; Tools Required For Assembly - Agri-Fab 45-02114 Notice D'utilisation

Epandeur-aerateur a grande protee a remorquer
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Any power equipment can cause injury if operated improperly or if the user does not understand how to operate
the equipment. Exercise caution at all times when operating equipment.
Read the towing vehicle owners manual and towing
vehicle safety rules. Know how to operate your tractor
before using the broadcast spreader attachment.
Read the chemical label instructions and cautions for
handling and applying the chemicals purchased for
spreading.
Wear eye and hand protection when handling and when
applying lawn or garden chemicals.
Never operate tractor and spreader attachment without
wearing substantial footwear, and do not allow anyone
to ride or sit on spreader attachment frame.
Never allow children to operate the tractor or spreader
attachment, and do not allow adults to operate without
proper instructions.
LOOK FOR THIS SYMBOL TO POINT OUT IMPORTANT SAFETY PRECAUTIONS. IT
MEANS — ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED.

TOOLS REQUIRED FOR ASSEMBLy

(1) Pliers
(2) 7/16" Wrenches
(1) Hammer
REMOVAL OF PARTS FROM CARTON
Remove all parts and hardware packages from the carton. Lay
out all parts and hardware and identify using the illustrations
on pages 2 and 3.
1. Turn the spreader upside down as shown in figure 1.
ENGLISH

RULES FOR SAFE OPERATION

ASSEMBLy INSTRUCTIONS
Always begin with the transmission in first (low) gear and
with the engine at low speed, and gradually increase
speed as conditions permit. Maximum towing speed
- 10 M.P.H.
When towing broadcast spreader do not drive too close
to a creek or ditch and be alert for holes and other
hazards which could cause you to loose control of the
broadcast spreader and tractor.
Before operating vehicle on any grade (hill) refer to the
safety rules in the vehicle owner's manual concerning
safe operation on slopes. Stay off steep slopes!
Follow maintenance and lubrication instructions as
outlined in this manual.
FIGURE 1
4

Publicité

Table des Matières
loading

Table des Matières