Maintenance - FUXTEC FX-KM196 Mode D'emploi

Original-Bedienungsanleitung Benzin-Kehrmaschine FX-KM196_de_en_fr_ita_rev07
The brushes will not rotate
The machine will not run
The machine does not sweep
effectively

12. Maintenance

MAINTENANCE SCHEDULE
PROCEDURES
Hardware - Inspect & tighten
Engine & Air Filter - check &
clean if necessary
Oil, engine - check the level
Wash Unit - Remove Grease &
Debris
Maintenance
If you need to change the belts, please contact the distributor or local
agent. Do not change them by yourself.
Residual risks
Even when the machine is used as prescribed, it is not possible to eliminate
all residual risk factors. The following hazards may arise in connection with
the power tool's construction and design:
Damage to the lungs if an effective dust mask is not worn.
1.
Check whether the belt coupling is adjusted
correctly.
Check whether the v-belt is defective
Make sure that the belt coupling is adjusted
correctly
Check whether the v-belt is defective
Check whether the brush distance to the
surface is set correctly
BEFORE
EACH USE HOURS
25 100
HOURS EACH USE
AFTER
39