During Use - FUXTEC FX-KM196 Mode D'emploi

Original-Bedienungsanleitung Benzin-Kehrmaschine FX-KM196_de_en_fr_ita_rev07

8. During Use

Snow
• Snow is removed more quickly when it is still fresh - passback over the
already cleared zones to remove snow residue.
• If possible, clear the snow in the direction of the wind. Check the
distance and the direction of the removed snow.
• Reduce the engine rotations before stopping it.
Dirt & Gravel
• To reduce the amount of duct lifted when sweeping, work at low brush
speed. If possible, also work on damp or cloudy days or after it rains.
• For gravel, adjust the height of the brush to avoid throwing them and
causing potential damages.
Heavy Debris
• Reduce forward speed and work without using the entire machine
working width.
WARNING
SAFELY OPERATE EQUIPMENT
Do not operate equipment until you are thoroughly trained by a qualified
operator in how to use the controls; know its capabilities, dimensions, and
all safety requirements. See your prime movers manual for these
instructions.
• Keep all step plates, grab bars, pedals, and controls free of dirt, grease,
debris, and oil.
• Never allow anyone to be around the equipment when it is operating.
• Do not allow riders on the attachment or the prime mover.
• Do not operate the equipment from anywhere other than the correct
operator's position.
• Never leave equipment unattended with the engine running or with this
attachment in a raised position.
• Do not alter or remove any safety feature from the prime mover or this
attachment.
• Know your worksite safety rules as well as traffic rules and flow. When
in doubt on any safety issue, contact your supervisor or safety
coordinator for an explanation.
WARNING
IN AN EMERGENCY, RELEASE LEVERS AS QUICKLY AS POSSIBLE AND STOP
THE ENGINE.
37