Operation - FUXTEC FX-KM196 Mode D'emploi

Balayeuse thermique 3 en 1
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Original-Bedienungsanleitung Benzin-Kehrmaschine FX-KM196_de_en_fr_ita_rev07

7. Operation

CAUTION
A SWEEPER IS A DEMANDING MACHINE.
Only fully trained operators or trainee operators under the supervision of a
fully qualified person should use this machine.
Before operating sweeper:
Operate sweeper controls in an off-road location.
Be sure that you are in a safe area, away from traffic or other hazards.
Check all hardware making sure it is tight.
Replace any damaged or tired hardware with properly rated fasteners.
Check tire pressure before sweeping.
Remove from the sweeping area all property that could be damaged
by flying debris.
Be sure all persons not operating the sweeper are clear of the sweeper
discharge area for protection, and wear a dust mask.
Always wear proper apparel such as a long-sleeved shirt buttoned at
the cuffs; safety glasses goggles or a face shield; ear protection; and
a dust mask.
While operating sweeper
DANGER
FALL HAZARD DO NOT OPERATE NEAR UNGUARDED EDGES.
This sweeper is not intended for rooftop use.
When operating sweeper, adhere to all government rules, local laws
and other professional guidelines for your sweeping application.
Minimise flying debris - use the slowest rotating speed that will do the
job.
Keep hands, feet, hair and other loose clothing away from all moving
parts.
Before leaving the operator's position for any reason stop engine.
NOTICE: AVOID TRANSMISSION DAMAGE. Do not shift while in motion.
34

Publicité

Table des Matières
loading

Table des Matières