Aux; Camera View - Pioneer DMH-130BT Mode D'emploi

AUX

You can display the video image output by the device connected to AUX input.
CAUTION
For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video
images, stop in a safe place and apply the parking brake.
NOTE
A Mini-jack AV cable (sold separately) is required for connection. For details, refer to the Installation
Manual.
Starting procedure
1
Press .
2
Touch [AUX].
The AUX screen appears.
14
En

Camera View

You can display the video image output by the device connected to camera input. For
details, refer to the Installation Manual.
CAUTION
Rear camera function is only as an assistant tool for driving. It cannot replace the drivers' attentions and
judgement.
▶Rear view camera
This product features a function that automatically switches to the full-screen image of
the rear view camera installed on your vehicle when the shift lever is in the REVERSE (R)
position.
▶Camera for Camera View mode
Camera View can be displayed at all times. Note that with this setting, the camera image
is not resized to fit, and that a portion of what is seen by the camera is not viewable.
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen
image may appear reversed.
• Immediately verify whether the display changes to the rear view camera image when the shift lever is
moved to REVERSE (R) from another position.
Starting procedure
1
Press .
2
Touch [Camera View] for connected camera view.
The video image is displayed on the screen.