Before The First Use - FriFri FSF55P Mode D'emploi

EN
SAFETY
- By ignoring the safety instructions the manufacturer can not be hold responsible for the damage.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
- Never move the appliance by pulling the cord and make sure the cord can not become entangled.
- The appliance must be placed on a stable, level surface.
- This appliance is only to be used for household purposes and only for the purpose it is made for.
- This appliance is not intended for use by persons (including children under 8 ) with reduced physical, sen-
sory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning the use of appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
- To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or
any other liquid.
- The temperature of accessible surfaces may be high when the appliance is operating.
- The appliance is not intended to be operated by means of an external timer or a separate remote-control
system.
- The appliance is to be connected to a socketoutlet having an earthed contact (for class I appliances).
Surface are liable to get hot during use.
- WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of an electric shock.

BEFORE THE FIRST USE

- Remove all packaging material.
- Remove any stickers or labels from the appliance.
- Thoroughly clean the basket and the pan with hot water, some washing-up liquid and a non-abrasive
sponge.
- Wipe the inside and outside of the appliance with a moist cloth.
- Place the appliance on a stable, horizontal and level surface, do not place the appliance on non-heat-
resistant surfaces.
- Place the basket in the pan properly
- This is an air fryer that works on hot air. Do not fill the pan with oil or frying fat.
- In order to prevent disruptions of the airflow do not put anything on top of the appliance and make sure
there is always 10 centimeter of free space around the appliance.
- NOTE: for baking chips we advise a maximum of 800 grams to get the best result.
- NOTE: After the baking process the appliance needs to cool down, this cooling process will activate
automatically when the timer is done. Please avoid unplugging the appliance from the net-socket before
the cooling process is finished because the remaining hot air can damage the appliance.
Untitled-2 6
USE
- Put the mains plug in an earthed wall socket.
- Carefully pull the pan out of the air fryer.
- Put the ingredients in the basket.
- Slide the pan back into the air fryer.
- Never use the pan without the basket in it.
- Do not touch the pan during and some time after use, as it gets very hot. Only hold the pan by the handle.
- When the pan is cold, please warm up the pan for 5 minutes on a temperature of 80 degrees. After this,
the device is ready for use.
- There are 8 seven frying programs included: CHIPS, CHICKEN, LAMB, SHRIMP, MEAT, CAKE, FISH and
BACON. Use the mode button to select the desired program.
- When you press the button, the airfryer will start the corresponding program. When you have chosen
the wrong program, you can abort by pressing the power button again. The device will stop after 20
seconds. After this you can select another function. It is also possible to adjust the chosen program by
changing the time and temperature.
- The time can be adjusted with the timer control buttons. Press the timer control buttons one time to
increase or decrease the frying time by one minute. Press and hold one of the buttons to adjust the time
faster. You can set the timer between 1 and 60 minutes.
- The temperature can be adjusted with the temperature control buttons. Press the temperature control but-
tons one time to increase or decrease the temperature by 10 degrees. Press and hold one of the buttons
to adjust the temperature faster. You can set the temperature between 80 and 200 degrees.
- It is also possible to start the device without selecting a function. Set the time and temperature with the
timer and temperature control buttons, then press the
- When you pull out the pan during the cooking process, the device will shut off automatically. When you
reinsert the device, the program will resume.
- To cancel any program, press the power button. The device will shut off after 20 seconds.
- Excess oil from the ingredients is collected on the bottom of the pan.
- Some ingredients require shaking halfway through the preparation time. To shake the ingredients, pull the
pan out of the appliance by the handle and shake it. Then slide the pan back into the air fryer. Do not press
the basket release button during shaking
- When you hear the timer beep, the set preparation time has elapsed. The device will shut off after 20
seconds. Pull the pan out of the appliance and place it on a heat-resistant surface.
- Check if the ingredients are ready. If the ingredients are not ready yet, simply slide the pan back into the
appliance and set the timer to a few extra minutes.
- To remove small ingredients (e.g. fries), press the basket release button and lift the basket out of the pan.
Do not turn the basket upside down with the pan still attached to it, as any excess oil that has collected on
the bottom of the pan will leak onto the ingredients.
- Empty the basket into a bowl or onto a plate. When a batch of ingredients is ready, the air fryer is instantly
ready for preparing another batch.
6
button.
4/12/17 17:44